Kingston HX424S14IB/16

$109.00

SINGLE CHANNEL SO Dim: 16GB (1x16GB) DDR4 2400MHz HyperX Impact CL14

Compare
Category:

Description

SPECIFICATIONS

CL(IDD) 14 cycles

Row Cycle Time (tRCmin) 46.75ns (min.)

Refresh to Active/Refresh 350ns (min.)

Command Time (tRFCmin)

Row Active Time (tRASmin) 29.125ns (min.)

Maximum Operating Power TBD W*

UL Rating 94 V – 0

Operating Temperature 0癈 to 85癈

Storage Temperature -55癈 to +100癈

*Power will vary depending on the SDRAM used.

DESCRIPTION

HyperX HX424S14IB/16 is a 2G x 64-bit (16GB) DDR4-2400

CL14 SDRAM (Synchronous DRAM) 2Rx8, memory module,

based on sixteen 1G x 8-bit DDR4 FBGA components. Each

module supports Intel� Extreme Memory Profiles (Intel� XMP)

2.0. This module has been tested to run at DDR4-2400 at a low

latency timing of 14-14-14 at 1.2V. Additional timing parameters

are shown in the PnP Timing Parameters section below. The

JEDEC standard electrical and mechanical specifications are as

FEATURES

� Power Supply: VDD = 1.2V Typical

� VDDQ = 1.2V Typical

� VPP – 2.5V Typical

� VDDSPD = 2.25V to 3.6V

� On-Die termination (ODT)

� 16 internal banks; 4 groups of 4 banks each

� Bi-Directional Differential Data Strobe

� 8 bit pre-fetch

� Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)

� Height 1.18� (30.00mm)

Note: HyperX DDR4 PnP memory will run in most DDR4 systems up to the

speed allowed by the manufacturer’s system BIOS. PnP cannot increase the

system memory speed faster than is allowed by the manufacturer’s BIOS.

Memory overclocking is locked at 2133MHz on all mobile processors

except Core i5 and i7 quad core processors with a TDP of 45W or greater.

Reviews

There are no reviews yet.

Be the first to review “Kingston HX424S14IB/16”